•The speed of cardboard is up to 7500S/H, the speed of corrugated paper is 6000S/H, and the diecutting precision is ± 0.1 mm.
•There are 9 heating temperature zones at the upper platform, The temperature of every 3 areas can be adjusted separately, it is widely used for the hot embossing, creasing, and other hot pressing process.
•With four-sucking, five-conveying suckers, the feeding head can suck powerfully, convey steadily, and the suckers can be adjusted with non-stop running following the status of paper for suction height,angle and suction air flow, to achieve thickness of balance, smooth and accurate feeding.
•Pre-stacking paper mechanism, main and auxiliary paper feeding device achieve non-stop feeding.
•Electrical system adopts PLC computer program controller. There are human-machine interfaces at the operating side, delivery
side, which monitor the operating condition of machine, troubles, input and output of PLC, easy to operate.
•Four sensors are equipped at the front lay, to check the right-position precision of paper and avoid waste.
•The left and right side lays are installed. It has two functions of push and pull, easy to change. The position and pressure of side
lay is adjustable to coincide with the paper of different size and thickness, and the sensors on them can detect the right-position
precision of paper all the time.
•Using 230^ large stroke angle intermittent mechanism, which ensures the machine to run smoothly with high speed.
•It is adopted imported pneumatic clutch, FM motor, brake smoothly.
•The hot embossing, diecutting frame and diecutting steel plate adopt plate-locking system, easy operation and with high precision.
•The hot embossing plate and diecutting frame can be replaced, in order to achieve the conversion function of embossing and diecutting.
•The pressure of machine can be adjuted on the human-machine interface.
British IWIS high-precision and high-strength chain is used to ensure precision of running.
High-strength aluminum gripper is effectively used to prevent quieve, also with adjustable device on it, the gripper positioning accuracy due to the main chain or mechanical wear and tear error can be adjusted to compensate.
•The thickness of the left and righr main wall is 120mm, the upper platform, the moving platform, the bottom platform and other key components are casted with high-strength ductile cast iron, with long time to stress tempering, aging treatment, to ensure that no deformation at high pressure diecutting and stable pressure.
•Main driving with large modulus worm, worm gear, and unique oil lubricating system for the crank, ensures the long life of pendulum, rod and axle bush, and stable running of machine.
•External circulating lubricating air conditioning cooling system ensures constant lubricating efficiency inside the main transmission joint.
•Forced self-lubricating system which can ensure the oil supply of internal main driving unit is normal, automatic shutdown without oil.
•Lubrication system automatically controls the timing of the lubrication points, grease and lubricate with timing and quantitative.
•Pneumatic sampling is adopted, checking quickly and easily.